5-IN-1 DRILL & REPAIR TOOLS BUNDLE

6-Piece Step Drill & Side-Cutting Drill Bit Set with Case

Description:

A versatile set combining 3 step drill bits for drilling and enlarging holes with 3 serrated bits for drilling and side-cutting tasks. The stepped profiles allow you to reach several hole diameters using the same bit, while the included case keeps all six pieces organised.

Package Contents & Sizes:

• 1 step drill bit with a 4–12 mm diameter range.
• 1 step drill bit with a 4–20 mm diameter range.
• 1 step drill bit with a 4–32 mm diameter range.
• 3 drilling and side-cutting bits in 3, 6 and 8 mm sizes.
• Storage case for the six bits.

How to Use:

1. Choose the appropriate bit and secure both the workpiece and the bit in the drill chuck.
2. For step drilling, begin at a low speed suitable for the material, keeping the bit straight and applying steady pressure.
3. Stop at the required hole diameter. Do not apply sideways pressure to the step drill bits.

Match the bit to the material and its thickness. The listed sizes do not mean that the bits are suitable for every metal or material thickness.

Photos & Videos:

Click an image to view it at full size.

6-Piece Combination Drill & Tap Bit Set

Description:

Combination bits with a drilling tip and a threaded cutting section for creating internal threads that accept matching screws or bolts. The bits feature hex shanks for compatible chucks or holders and are marked HSS. This set is designed for drilling and tapping, not for extracting damaged screws, bolts or nuts.

Package Contents & Sizes:

• 6 combination drill and tap bits: M3 × 0.5, M4 × 0.7, M5 × 0.8, M6 × 1, M8 × 1.25 and M10 × 1.5.
• Storage case as pictured.

How to Use:

1. Choose the thread size required for your screw or bolt and secure the workpiece.
2. Keep the bit perpendicular to the surface. Use a low speed and suitable cutting oil when working with compatible metals.
3. Drill and cut the thread gradually without forcing the bit, then reverse the tool to withdraw it from the thread.

Do not use hammer mode. Check that the bit is suitable for the material and its thickness before use.

Photos & Videos:

Click an image to view it at full size.

6-Piece Double-Ended Damaged Screw Extractor Set

Description:

Double-ended extractor bits designed to help remove screws with damaged drive recesses that a screwdriver can no longer grip properly. One end prepares a recess in the screw head, while the spiral extractor end grips the screw for removal in reverse. The pictured bits are marked HSS 4341.

Package Contents:

• 6 double-ended screw extractor bits.
• Visible bit labels: #0, #1, #2, #2, #3 and #4.
• Plastic storage case.

How to Use:

1. Select the appropriate bit and prepare a recess in the centre of the screw head using the drilling end, following the set's instructions.
2. Stop the drill, flip and secure the bit, then position the spiral extractor end inside the recess.
3. Run the drill slowly counterclockwise, keeping the bit aligned and applying steady pressure until the screw begins to back out.

Results depend on the screw's condition and how tightly it is seized. Avoid high speed and excessive pressure.

Photos & Videos:

Click an image to view it at full size.

14-Piece Metric & SAE Hex Nut Driver Set

Description:

A selection of metric and imperial nut driver bits for tightening and loosening nuts and external hex-head fasteners. The labelled holder keeps the bits organised and makes it easier to select the required size. Hex shanks fit compatible drill chucks or bit holders.

Package Contents & Sizes:

• 7 metric bits: 5, 5.5, 6, 7, 8, 10 and 12 mm.
• 7 imperial bits: 3/16, 1/4, 9/32, 5/16, 11/32, 3/8 and 7/16 inch.
• Storage holder for the fourteen bits.

How to Use:

1. Select the exact size for the nut or bolt head and secure the bit in a compatible tool.
2. Make sure the socket is fully seated over the fastener before starting.
3. Begin at a low speed and torque setting, adjusting as needed when tightening or loosening.

The listed quantity and sizes refer to the set in the first image. Some illustrative photos show other size sets and do not indicate that all pictured pieces are included.

Photos & Videos:

Click an image to view it at full size.

Self-Adhesive Window & Door Screen Repair Tape

Description:

Self-adhesive mesh tape designed to repair small tears and holes in window and door screens, helping prevent mosquitoes and insects from entering through damaged areas.

It can be used to patch damaged mesh without replacing the entire screen, depending on the size and location of the tear.

How to Use:

1. Thoroughly clean dust and dirt from the damaged screen using a dry cloth.
2. Trim any loose or protruding strands to prepare the damaged area for repair.
3. Cut a piece of tape large enough to cover the hole completely, leaving extra overlap around the edges.
4. Remove the protective backing and apply the patch to the first side of the screen.
5. Press the patch firmly to help it adhere to the mesh.
6. Cut a second patch to the appropriate size and apply it to the opposite side of the damaged area.
7. Press both patches firmly for a stronger hold on both sides.
8. If needed, reinforce adhesion with an appropriate amount of waterproof sealant compatible with the screen material. Allow it to dry completely before use.

Package Contents:

• One roll of self-adhesive window and door screen repair tape.

Photos & Videos:

Click an image to view it at full size.